Close Menu
  • Home
  • Reviews
    • Turntables
    • Cartridges
    • Phono Preamps
    • Speakers
    • Headphones
    • LP Albums
  • Guides
    • DIY Audio
    • Manuals
  • Best Of
  • About
What's Hot

How to Build Your First Hi-Fi System: Why Listening Time Beats Budget (An Audio T Case Study)

20/11/2026

How to Change the Stylus on an Audio-Technica Turntable

20/11/2026

How to Align a Turntable Cartridge: A Complete Guide

15/11/2026
Crackling SoundCrackling Sound
  • Home
  • Reviews
    • Turntables
    • Cartridges
    • Phono Preamps
    • Speakers
    • Headphones
    • LP Albums
  • Guides
    • DIY Audio
    • Manuals
  • Best Of
  • About
Home › Guides › How to Change the Stylus on an Audio-Technica Turntable
Guides

How to Change the Stylus on an Audio-Technica Turntable

Jakub KlimentBy Jakub Kliment20/11/2026No Comments8 Mins Read
Facebook Twitter Pinterest LinkedIn Tumblr Email
How to change an Audio-Technica stylus - Illustrative image
Share
Facebook Twitter LinkedIn Pinterest Email

How to change an Audio-Technica stylus depends on which cartridge your turntable has, because the two families Audio-Technica fits to most of its decks come off in different directions. The swap itself takes two minutes and needs no tools, but buying the correct part number matters more than the technique. This guide, part of our turntable wiki, gives the replacement stylus for each current Audio-Technica turntable, what it costs and how to change it safely.

Key takeaways

  • Find your cartridge first: the AT-LP60X uses the AT3600L, the AT-LP70X and AT-LP3XBT use the AT-VM95C, the AT-LP120XUSB the AT-VM95E.
  • The old ATN3600L is discontinued: for the AT-LP60X buy the ATN3600LC ($36, conical) or ATN3600LE ($46, elliptical).
  • VM95 styli fit any VM95 body, so an AT-LP70X can go from the stock conical to a Shibata ($199) with the same two-minute swap; counted per hour of life, the Microlinear is cheaper than the Shibata.
  • LP60X styli rock down and out; VM95 styli pull straight forward off the front of the cartridge.
  • A like-for-like stylus needs no new tracking force setting, which is why owners swap VM95 styli rather than buying a second cartridge on its own headshell, which means rebalancing the arm at every change.

Contents

Toggle
  • Which stylus does your Audio-Technica need?
  • How to change the stylus on an AT-LP60X
  • How to change a VM95 stylus (AT-LP70X, LP3XBT, LP120XUSB)
  • Is it worth upgrading the stylus?
  • Summary: How to change an Audio-Technica stylus
  • How to change an Audio-Technica stylus: FAQ
    • How often should I change my Audio-Technica stylus?
    • Do I need to rebalance the tonearm after changing the stylus?
    • Can I put a VM95 stylus on my AT-LP60X?
    • Did I damage my stylus by touching it?
    • Are cheap third-party Audio-Technica styli worth it?

Which stylus does your Audio-Technica need?

TurntableCartridgeDirect replacementUpgrade options
AT-LP60X (and LP60 series)AT3600L (integrated)ATN3600LC conical, $36ATN3600LE elliptical, $46
AT-LP70XAT-VM95C (integrated)AT-VMN95C conical, $32VMN95E $52, VMN95EN $109, VMN95ML $159, VMN95SH $199
AT-LP3XBTAT-VM95C on headshellAT-VMN95C, $32any VM95 stylus
AT-LP120XUSBAT-VM95E on headshellAT-VMN95E elliptical, $52VMN95EN, ML, SH
VMx cartridges (VM540xML, VM740xML, VM750xSH and others)AT-VMxthe matching VMNx stylusVMN20xEB $69 to VMN60xSL $449
Replacement styli for current Audio-Technica turntables (As of 11/2026. Prices from Audio-Technica US and US retailers.)

The AT-LP60X’s two current styli are the ATN3600LC and ATN3600LE; the older ATN3600L is now listed as discontinued. If a shop still sells an “ATN3600L”, check whether it is old stock or a non-genuine copy. Mind the names too: AT3600L is the cartridge, ATN3600L the stylus, and owners have ordered the wrong one.

Cheap no-name turntables are another trap. Owners of budget decks advertised with an “Audio-Technica” cartridge found an unbranded look-alike that no ATN3600 stylus would fit. If the new stylus will not seat, compare the back of the old one with the photo of the genuine part before forcing it; a stylus identification service at a specialist retailer, or a genuine AT3600L cartridge for little more than a stylus, solves it.

Watch out

VM95 styli do not fit the older AT95E cartridge found on many earlier decks, including the original AT-LP120-USB. An AT95E takes the ATN95E. Read the model printed on the cartridge body before ordering.

(obrázok: Audio-Technica VM95 cartridge with the stylus assembly being pulled forward | alt: how to change audio technica stylus)

How to change the stylus on an AT-LP60X

  1. Turn the turntable off and lock the tonearm on its rest.
  2. Keep the guard on the new stylus.
  3. Hold the tonearm still at the headshell with one hand.
  4. Grip the old stylus housing between thumb and forefinger and rock it downwards, then pull it away at a slight angle.
  5. Insert the new stylus at the same slight angle so its hook fits the slot in the cartridge body, then press until it clicks and sits flush.
  6. Remove the guard, unlock the arm and play a record.

Owners who have trouble with step 5 describe the same fix: seat the back of the stylus in the groove first, then push the front up until it clicks. If it still drops off or sits crooked, the plastic catch may be broken; replace the stylus or return the deck rather than gluing it, which some owners have tried.

How to change a VM95 stylus (AT-LP70X, LP3XBT, LP120XUSB)

  1. Turn the turntable off. On the AT-LP120XUSB and LP3XBT, unscrew the locking ring and take off the headshell; it is easier to work on it in your hand. On the AT-LP70X, lock the arm on its rest.
  2. Hold the cartridge body (or the headshell) firmly.
  3. Grip the stylus housing by its ridged sides and pull it straight forward, away from the cartridge body.
  4. Slide the new stylus straight onto the front of the body until it seats fully, with no gap at the sides.
  5. Refit the headshell, tighten the ring, remove the guard and check that the arm floats correctly.

Owners recommend taking an SME-type headshell off rather than working on the arm, because there is more room and less risk of bending the cantilever. Some buy the VM95 pre-mounted on its own headshell to switch quickly between two tips, then regret it: a headshell of a different weight means rebalancing the arm and resetting anti-skate at each swap, while a stylus-only swap on the same body needs neither.

Tip

On the AT-LP120XUSB, a stylus change is a good moment to check tracking force with the counterweight. Our guide to how to balance a tonearm shows how.

Is it worth upgrading the stylus?

On a VM95 body the upgrade is the most economical way to better sound on an Audio-Technica deck, because you keep the body and only swap the tip.

Example

Worked example: An AT-LP70X owner replacing a worn stock stylus pays $32 for another conical, $109 for the nude elliptical VMN95EN, or $199 for the Shibata VMN95SH. The step from conical to nude elliptical is the biggest jump for the money; Shibata and Microlinear tips trace more of the groove but also show worn records more clearly.

The lifetimes are the figures Audio-Technica quotes: about 300 to 500 hours for conical, 300 for elliptical, 1,000 for Microlinear and 800 for Shibata. Owners who tracked their listening found they replaced well before the rated life once the sound had faded, so treat these figures as a ceiling. Wear is gradual on conical and elliptical tips, while owners say a Microlinear sounds almost unchanged until it goes quite suddenly.

Microlinear or Shibata is a real debate among owners. Those who prefer the ML describe cleaner highs and almost no inner-groove distortion on hot, long sides; those who prefer the SH call it warmer and kinder to poor recordings. Several who owned both say they could not tell them apart blind. Owners with mostly used records add one practical point: a fine tip reaches parts of the groove older styli never touched, so it picks up dirt faster and needs a brush more often.

Audio-Technica turntable playing a vinyl record with a yellow cartridge stylus, illustrating how to change an Audio-Technica stylus

On the AT-LP60X the choice is narrower: the elliptical ATN3600LE costs $10 more than the conical and is the only upgrade the integrated cartridge allows. Owners’ advice is to use the stock conical for its full life and buy the elliptical when it is due, since many say they hear little difference on entry-level speakers. For a wider range, our AT-LP60X review covers what the deck can and cannot do, and our list of turntable cartridge upgrades covers decks with a replaceable cartridge.

Summary: How to change an Audio-Technica stylus

To change an Audio-Technica stylus, first check the cartridge: the AT-LP60X takes the ATN3600LC or LE, which rock down and out, while VM95 decks (AT-LP70X, LP3XBT, LP120XUSB) take any VM95 stylus, which pulls straight forward. The old ATN3600L is discontinued, and VM95 styli do not fit an AT95E. A like-for-like swap needs no adjustment, and a VM95 owner can upgrade from a $32 conical to a $199 Shibata in the same two minutes.

How to change an Audio-Technica stylus: FAQ

How often should I change my Audio-Technica stylus?

When it shows wear: distortion, sibilance or skipping on records that used to play cleanly. Clean it regularly; our guide to cleaning a turntable needle explains how.

Do I need to rebalance the tonearm after changing the stylus?

Not for a like-for-like replacement. Check the tracking force if you change to a different stylus family.

Can I put a VM95 stylus on my AT-LP60X?

No. The AT-LP60X uses the AT3600L cartridge, which takes only ATN3600-series styli.

Did I damage my stylus by touching it?

Almost certainly not: the diamond is far tougher than your finger. The part that suffers is the cantilever, the thin tube holding it, so clean with a brush from back to front and never sideways.

Are cheap third-party Audio-Technica styli worth it?

Some work, many do not match the original’s tip or cantilever. Genuine styli are the safe choice.

Sources (5)
  1. Audio-Technica: AT-LP60X product page, current replacement styli and prices. www.audio-technica.com/en-us/at-lp60x
  2. Audio-Technica: ATN3600L replacement stylus, removal and installation instructions, discontinued status. www.audio-technica.com/en-us/atn3600l
  3. Audio-Technica: AT-LP70X product page and VM95 styli prices. www.audio-technica.com/en-us/at-lp70x
  4. Audio-Technica: AT-VM740xML and AT-VMx replacement styli prices. www.audio-technica.com/en-us/at-vm740xml
  5. Turntable Lab: AT-VMN95E replacement stylus, price and compatibility; AT-LP120XUSB (product pages). www.turntablelab.com

How we prepared this article

This article was written by the Crackling Sound team following our editorial policy. Products are tested hands-on, specifications come from manufacturer documentation, and we update articles when things change.

  • Author: Jakub Kliment
  • Last updated: November 20, 2026
  • Found a mistake? Write to us at info@cracklingsound.com.

Listening impressions are our opinion. Some links are affiliate links – they never influence our verdicts. Affiliate disclosure · Editorial team

Share. Facebook Twitter Pinterest LinkedIn Tumblr Email
Jakub Kliment

Jakub is an author at Crackling Sound. He writes buying guides, comparisons and how-to articles about turntables, speakers and headphones, and helps keep older reviews up to date.

Related Posts

How to Build Your First Hi-Fi System: Why Listening Time Beats Budget (An Audio T Case Study)

20/11/2026

How to Align a Turntable Cartridge: A Complete Guide

15/11/2026

How to Adjust Anti-Skate on a Turntable (and Check That It Is Properly Set)

14/11/2026
Add A Comment
ContentsToggle Table of ContentToggle
  • Which stylus does your Audio-Technica need?
  • How to change the stylus on an AT-LP60X
  • How to change a VM95 stylus (AT-LP70X, LP3XBT, LP120XUSB)
  • Is it worth upgrading the stylus?
  • Summary: How to change an Audio-Technica stylus
  • How to change an Audio-Technica stylus: FAQ
    • How often should I change my Audio-Technica stylus?
    • Do I need to rebalance the tonearm after changing the stylus?
    • Can I put a VM95 stylus on my AT-LP60X?
    • Did I damage my stylus by touching it?
    • Are cheap third-party Audio-Technica styli worth it?

Latest reviews

  • How to Build Your First Hi-Fi System: Why Listening Time Beats Budget (An Audio T Case Study)
  • How to change an Audio-Technica stylus - Illustrative image
    How to Change the Stylus on an Audio-Technica Turntable
  • How to Align a Turntable Cartridge - Illustrative image
    How to Align a Turntable Cartridge: A Complete Guide
  • How to adjust anti-skate on a turntable - Illustrative image
    How to Adjust Anti-Skate on a Turntable (and Check That It Is Properly Set)
  • how to hook up a turntable to a receiver - Illustrative image
    How to Hook Up a Turntable to a Receiver (With or Without a Phono Preamp)

More from this topic

  • How to Build Your First Hi-Fi System: Why Listening Time Beats Budget (An Audio T Case Study)
  • How to Align a Turntable Cartridge: A Complete Guide
  • How to Adjust Anti-Skate on a Turntable (and Check That It Is Properly Set)
  • How to Hook Up a Turntable to a Receiver (With or Without a Phono Preamp)
All Guides →

Crackling Sound

Independent reviews and guides for turntables, vinyl, speakers and headphones – written by people who listen to records every day.

Topics
  • Turntables
  • Cartridges
  • Phono Preamps
  • Speakers
  • Headphones
  • LP Albums
  • Guides
  • Best Of
The Listening Room
  • About us
  • Editorial team
  • Editorial policy
  • Affiliate disclosure
  • Disclaimer
  • Contact
Get Involved

Love vinyl and hi-fi? Write with us or join the team.

  • Join the team
  • Write for us
  • Manuals library
  • Audio events calendar
Privacy policy · Consent settings · Disclaimer© 2026 Crackling Sound. All rights reserved. As an Amazon Associate we earn from qualifying purchases. Operator: Sandeo s. r. o.

Type above and press Enter to search. Press Esc to cancel.

We use cookies to keep the site running, understand how it is used and – with your consent – for affiliate and marketing purposes. You can change your choice at any time via "Consent settings" in the footer.
You can change your cookie consent at any time.